Washing Machine Disposal

Washing Machine Disposal glossary

The terms you'll come across, explained in plain English.

Authorised treatment facility
A permitted site where waste appliances are depolluted and broken down so metals, plastics and components can be recovered. Collected washing machines should always end up at one of these sites.
Blanking cap
A small cap fitted to an open valve or sink trap spigot after an appliance is removed, to stop leaks or water escaping when no new machine is connected.
Counterweight
Heavy concrete blocks bolted to the outer tub of a washing machine to stop it moving during spins. They account for much of the machine's weight.
Decor door
The cabinet-style door fixed to the front of an integrated appliance with brackets or a hinge kit. It is removed before the machine slides out and kept for the replacement.
Drain filter
A removable filter, usually behind a flap at the bottom front of a front loader, that catches fluff and objects. It is the main point for draining leftover water before removal.
Duty of care
The legal responsibility under the Environmental Protection Act 1990 to make sure your waste is handled by authorised people. Householders can be fined if their waste is fly-tipped by an unregistered collector.
Fill hose
The flexible hose that carries mains water from the isolation valve into the washing machine. Most screw on by hand and are removed with the machine.
Heat pump dryer
A tumble dryer that uses a sealed refrigerant circuit and compressor to reuse heat. Its refrigerant must be recovered at a suitable facility when the dryer is scrapped.
Integrated washing machine
A machine built into kitchen units behind a decor door that matches the cabinets. Removing it means taking off the door and plinth without damaging the kitchen.
Isolation valve
A small tap on the hot or cold supply pipe behind a washing machine. A quarter turn closes it so the fill hose can be removed without water flowing.
Standpipe
A vertical waste pipe behind the machine that the waste hose hooks into. It connects to the drain through a trap to stop smells coming back up.
Transit bolts
Long bolts fitted to the back of a washing machine to lock the drum during transport. They matter for moving a working machine but are not needed for disposal.
Waste carrier registration
A registration with the Environment Agency, Natural Resources Wales, SEPA or NIEA that allows a person or business to transport other people's waste. You can check it on a public register.
Waste hose
The grey, ridged hose that carries dirty water from the machine to a standpipe or a spigot on the sink trap. It holds water, so drain it into a bowl.
WEEE
Short for waste electrical and electronic equipment. Washing machines, dryers and other appliances fall into this category and must be collected separately and treated at an authorised facility rather than landfilled.

Get a free washing machine disposal quote

Tell us what you need and we'll come back with a clear price.

Request a quote